Category: Mechanical Engineering

Dr. Shashikant

Educational Qualification BE – Mechanical Engineering M.Tech – Thermal Power Engineering P.hD – Computational Fluid Flow and Heat Transfer Total experience 04 Years Area of Interest Numerical Analysis of Heat and fluid flow Impinging jets Turbulence models LES method Conference/Journal Publications International Conferences Shashikant Pawar, D K Patel, Tanay Adhikary, Rigswattwa Basu, Turbulent Flow and Heat Transfer Characteristics of an Inclined Jet Impingement for Target Surface Cooling, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 10-12, 2018, IIT Bombay, Mumbai, India. Shashikant, D K Patel, Numerical study of conjugate heat transfer due to impingement of turbulent slot jet onto a moving flat plate, Fifth International Conference on Computational Methods for Thermal […]

Read More

Mr. Praveen K Patil

Educational Qualification BE- Mechanical Engineering M.Tech- Thermal Power Engineering Total experience 1.5 Years Area of Interest Biodiesel and I.C.Engines (Thermal Power Engineering) Conference/Journal Publications K.Patil, Dr.M. C.Navindgi presented International Journal paper titled “Optimization of diesel engine parameters with blends of waste cooking oil biodiesel fuel and diethyl ether as an additive by taguchi method” International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) volume 4, issue 7,July 2018,Impact factor: 5.22.(UGC approved). K.Patil, Dr.M. C.Navindgi presented International Journal paper titled “Experimental investigation of effect of various parameters on engine characteristics using WCO as biofuel and finding optimized condition using taguchi method” International Journal for Science and Advance Research in Technology (IJSART) volume 4, issue 7, July 2018

Read More

Mr. Santhosh Acharya

Educational Qualification BE-Mechanical Engineering M.Tech- Machine Design Total experience 02 Years Area of Interest Machine Design Welding Technology Finite Element Analysis(Transient thermal and Structural Analysis) Conference/Journal Publications Rangaswamy,I.Sogalad,S.Basavarajappa,SanthoshAcharya,G.C.ManjunathPatel,Experimental analysis and prediction of strength of adhesive-bonded single-lap composite joints: Taguchi and artificial neural network approaches,SNAppl.Sci.2 (2020).doi:10.1007/s42452-020-2851-8. ShashikanthaKarinka,AniketanBekal,Rakesh,SanthoshAcharya,Reduction of Production Cycle Time of Wind Turbine Blades,JMERD(2019)47–54.doi:http://doi.org/10.26480/jmerd.02019.97.100.

Read More

Ms. Mamatha K M

Educational Qualification BE – Mechanical Engineering M.Tech – Manufacturing Science Total experience 1.8 Years Area of Interest Smart Materials Conference/Journal Publications International Conferences International conference on ICCTEM July 12-14 2012 in Vidyavardhaka College of Engineering (VVCE) Mysore-02 Karnataka. Paper ID:  ME192 Paper ID-305Paper title: “Corrosion behavior of Cu-Zn-Ni Shape Memory Alloy. National Journals & Conferences National conference on “EMERGING TRENDS IN MECHANICAL ENGINEERING” held on 24 & 25   february-2012 in “RAJARAJESWARI COLLEGE OF ENGINEERING” Bengaluru-560074.

Read More

Murali K B

Qualification BE- Mechanical Engineering MTech- Design Experience 9 Years Subjects handled Mechanics of material. Dynamics of machine. Kinematics of machine. Design of Machine Element-I &II Control Engineering Area of Research Interest Design and manufacturing International Journals Srinivas K. R1. Tariku Achamyeleh2, Somanath B3, Murali K B4. “Experimental Investigation of Mechanical Properties for Tamarind Shell Particles as Filler in Epoxy Composite”International Journal of Engineering Research And Advanced Technology (IJERAT) ISSN:2454-6135 [Volume. 03 Issue.3, March– 2017] sretechjournal.org National Journals Murali K B1 Srinivas K R2,Mohamad gowspher3,.“Stress analysis of circumferential splice joint and prediction of life to crack initiation”National Journal for Scientific Research and Development. [Volume-3 Issue-9, Nov. 2015]

Read More
nagaraj-hod

Dr. C R Rajashekar

Educational Qualification BE – Mechanical Engineering ME – Thermal Engineering Ph.D – Combustion Experience 30 years (Teaching + Industry) Area of Interest Combustion of fuel Alternate fuels Heat transfer Subjects handled Heat Transfer Applied Thermodynamics Control Engineering Engineering Graphics International Conferences “Impact of Bio-diesel fuel on Durability of CI Engines – A Review”, IOP Conf. Series: Materials Science and Engineering 376 (2018) 01201 “Experimental Studies on Effect of Nano particle blended Biodiesel Combustion on Performance and Emission of CI Engine”, IConMMEE 2018 IOP Publishing IOP Conf. Series: Materials Science and Engineering 376 (2018) 01201 Spray characteristics of Swirl Spray Injector-A review, International conference on applied Sciences, Engineering and Technology, MIT, Manipal, 2017, “Study of constraint issues in Elasto-plastic fracture Analysis […]

Read More

Mr. Swaroop

Qualification B.E- Mechanical Engineering M Tech- Design Engineering Experience 4 years (Industrial) Area of Research Interest TQM Principles (Lean Six Sigma) Application of Automation & Robotics in Agriculture Machinery Water Conservation technology Publications “Design and fabrication of Emergency Mudgun system for closing  tap hole in blast furnace”,  Author- Swaroop-1, Mayur D Pawar-2 Published a paper of PG project in International Journal of Innovative Research in Science, Engineering and Technology. (Vol. 7, Issue 9, September 2018).

Read More

Mr. Madhusudhan B

Qualification BE- Mechanical Engineering M.Tech- Design Experience 4 Years( Industry) Area of Research Interest Vibration of Rotary Equipment Total Quality Management Publications “Single Plane Mass Balancing of Generator Rotor Contemplating Vibration Amplitude Response” in topic in ‘International Journal of Innovative Research in Science, Engineering and Technology’ [Paper ID:  IJ70808011] ISSN (Online): 2319-8753, Authors – Madhusudhan B1, Ganesha.B2, G Raghavendra Setty3

Read More

Mr. Ganesh Raj Urs G P

Qualification BE- Mechanical Engineering M.Tech-Machine Design   Experience 3 Years Subjects handled Mechatronics Non-Traditional Machining Machine Tools and Operations Mechanical Measurements and Metrology Design of Machine Elements-1 Area of Research Interest Sustainable Design Use of vegetable oils as a replacement for mineral oils Publications International Journals “Design and validation of Spherical Pressure Vessel under seismic loads using FEA as per ASME” Authors: Ganesh Raj Urs G P, Dr. G M Sathyanarayana, Dr. Thammaiah Gowda ISSN: 23210613, Paper ID: IJSRDV3I60143    

Read More
yajnesha-p-shettigar

Mr. Yajnesh P Shettigir

Qualification BE- Mechanical Engineering M.Tech- Machine Design Experience 4 Years Subjects handled  Mechatronics  Mechanical Vibration  Smart Materials  Control Engineering Computer Aided Engineering Drawing Machine Tools & Operations Elements of Mechanical Engineering Computer  Numerical Control Programming Area of Research Interest Composite Martials EDM International Conferences “Fabrication and testing of Fibre-reinforced Glass-epoxy composite with Seashell as a filler Material”, Rueben Obed D’Souza, Abhilash Jose, Akshay Gopinath, et al, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012066 doi:10.1088/1757-899X/376/1/012066 “Electrical energy amplifying generator”, Akshay B N, Abhishek R, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012129 doi:10.1088/1757-899X/376/1/012129 “Development of In-Situ Tool Grinding Attachment for Micro-EDM”, Venugopal T. R., Muralidhara, Rathnamala Rao, ICETE -2015 ISBN: 978-93-84935-30-6 “Analysis of Damped Free Vibration […]

Read More